GrowerSELECT® Installation Manuals Binder

Hog Slat Inc. Newton Grove, NC USA February 2017 19 Feed Bins Lid Assembly 1. Place lid assembly over peak ring and reattach the 3/8” x 3” bolt along with lid stop bracket. 2. Tighten bolt enough so that the lid stop will be in contact with both clamp band flanges. 3. With the lid in full open position - Slip the Lock Collar over the cable and tighten just under the GST- LD1011 Guide bracket to lock the lid in the open position. 4. Loop the cable trough the GST- LD1013 Tube and secure with 617321 Cable Clamp. Trim off excess cable. GST-LD2017 Lid Latch 617321 Cable Clamp GST-LD2041 Lock Collar (Set with lid at full open) GST-LD1013 Tube GST-LD1019 Pull guide Assembly GST-LD2056 Actuation Cable GST-LD1011 Guide Bracket