GrowerSELECT® Installation Manuals Binder

Hog Slat Inc. Newton Grove, NC USA February 2017 26 Feed Bins Pneumatic Fill Assembly Attach the GST- PNF1012 Latch to the GST- LD1022 bracket. Secure using the 605012 ¼” bolt and 60680 ¼” nylock nuts. Add additional Flange provided to inside of roof panel to ensure a tight seal (no sealant required on the inside of roof panel). Secure using HS712 bin bolt and HS724 serrated flange nut. Caulk each side of the holes on the Elbow Flange side of the roof panel. As shown in black Cut Exhaust extension tube to fit. Attach Clamp bands at center of roof panel using the HS712 Carriage bolt and HS724 serrated flange nut. Secure tube connections using the 60887 #10x3/4” self drilling screws provided. Side Fill Tube (not included in Kit). After installing lid assembly, apply the GST-PNF1011 edge grip seal around the top edge of peak ring. Attach the GST-LD1022 Latch bracket centered at the lid clamp bracket.