GrowerSELECT® Installation Manuals Binder

Hog Slat Inc. Newton Grove, NC USA March 2017 12 Air Storm Fans Operation At all times during operation fan orifice should be free of debris. In the event any component of the fan is compromised discontinue use immediately and contact your local Hog Slat representative. During operation shutter doors should open completely and rotate a full 90 degrees. In the event shutter doors are not opening completely force door open 90 degrees. (Slight deformation of the corner of the shutter door lip is expected and will not affect the performance and or life of the shutter) Maintenance In order to begin any maintenance or service to the fan, power must be turned OFF and all moving parts must come to a complete STOP before accessing. All parts inside of the fan housing are accessed by removing the exit wire guard and inlet shutter. Once service is complete, clean excessive build-up from parts. Excessive dust and dirt on parts can cause vibration in the propeller and overheating of the motor. Before beginning operation again, ensure that all safeguards are back in place and all foreign objects are free from the area. Performance Hog Slat Inc. takes great pride in supplying our customers with fans that meet or exceed their performance numbers. This is achieved by testing fans from the production line and continually working to maintain consistency in test data. BESS LABS TEST NUMBER 15556 SEPTEMBER 30, 2015 With Cone Static Pressure (in.H2O) Airflow (cfm) rpm Volts Amps Watts cfm/Watt 0.00 11550 853 230.3 3.12 560 20.6 0.05 10780 849 230.1 3.23 585 18.4 0.10 9940 846 230.1 3.34 607 16.4 0.15 8900 843 230.1 3.44 628 14.2 0.20 7680 839 230.1 3.54 648 11.9 0.25 6370 835 229.9 3.64 667 9.5 0.30 4550 830 229.9 3.78 694 6.6