GrowerSELECT® Installation Manuals Binder

Hog Slat Inc. Newton Grove, NC USA May 2017 17 GROW-DISK ™ Feed System Sealing of Corners (WL10222096) 8. After proper Initial Operation / Start up (additional information see Start Up instructions) turn off the power of the GROW-DISK™ Feed System and remove nuts and eccentric washers on corners. Apply thick silicone in the sockets around the axle – top and bottom as shown above. Replace eccentric washers and nuts. 9. Apply silicone into the groove around the complete corner. 10. Press the silicone into the groove with your finger System may be operated 1.5 hours after silicone is applied. Note: Only Sealed Corners Can Be Pressure Washed! Silicone needs 24 hours to completely cure before reopen! Note: Corners must be installed with supports on each side as shown.