GrowerSELECT® Installation Manuals Binder

Hog Slat Inc. Newton Grove, NC USA May 2017 32 GROW-DISK ™ Feed System GROW-DISK™ HSCD-100 System Controller The HSCD-100 is a livestock feed system controller used to control a chain disk and auger motor with feed drop tubes. The user can define up to 12 feed cycle start and dump times over the course of a normal day. A proxy switch is used to detect feed in the last drop tube or at the end of the feed line. A toggle switch can be connected to manually stop the system without generating an alarm. The system features a current sensor input used for overload protection on the feeding system. (Refer to manual HSMANUAL-048 HSCD-100 User Manual) Recommended HSCD-100 System Controller Settings (amps, delay times, etc.) a. Recommendation for Amps (Motor 1.1kW 60Hz Single Phase, item# BM966) i. Max Current 7.5 Amps ii. Window Size 1.0 Amps iii. Critical Amp Draw 8.5 Amps b. Recommendation for Auger Delay for 900 feet system (speed of chain 115 feet/min) i. 8 minutes c. Recommendation for Feed Sensor Bypass (minimum 30 seconds less than auger delay) i. 7 minutes d. Recommendation for Shutdown Delay i. 30 seconds e. Recommendation for Maximum Runtime i. Average feeding time plus 10 minutes