2020 Hog Slat/Georgia Poultry Retail Product Catalog

27 FEED SYSTEMS #HS10-2 .................Proximity Sensor Mounting Kit Proximity Sensor Mounting Kit Constructed of of corrosive resistant plastic, this component kit securely mounts proximity switches to plastic tubes and hoppers. Does not include mounting screws or proximity switch. #HS10 .........................................................Proxy Plus Proxy Plus • Isolated wiring provides superior circuit protection • Can be used with any voltage • The best replacement proximity switch on the market! • Push-button control eliminates screw drivers! #HS09 ................................................... Proxy Classic Proxy Classic • Replaces Chore-Time® OEM Part #34255. #HS11 .........................................................Blue Proxy Blue Proxy Replacement for chain disk feed systems and Turkey Control Pan. #HS529 ...........Inside Mount Hopper Control Level #EL1052M ....................Replacement Micro Switch #HS529-7 ........ Replacement Blue Cloth Switch Cover Feed Level Control Controls feed motor to regulate the feed level in hoppers and feeders. Circuit is normally closed (motor runs) when there is no feed present against the paddle. The circuit is open #HS597 ......................Hopper Level Control Switch #EL1052M .................... Replacement Micro Switch #HS597-4 ........ Replacement Blue Cloth Switch Cover Hopper Level Control Switch Fully enclosed “normally closed” switch eliminates shock hazard. Switch features adjustable arm to set feed depth and removable feed shield to adapt to different applications. Prewired “Normally Closed” 110/220 Volt, 20 Amps max. #HS598 ...... Switch w/ internal relay, adjusts from 1-100 sec #HS617 .....Switch w/o internal relay, adjusts from 1-1000 sec Delay Relay Kit Prevents auger motor from “short cycling” & causing premature motor failure. #GE100-A1047 ............................. AP Maximum run Max Run Timer Help prevent a spill by controlling your maximum motor run times. #HS597-PROX .......Hopper Level Prox Control Switch Hopper Level Proximity Control Switch This hopper level control switch utilizes a proxy switch to eliminate problems with paddles and fabric diaphragms. Easy height adjustment to control feed level. Designed to work with HS765 Multi-Hopper Isolation Switch. The HS597- PROX is a low current device (220mA max) and can only be used to operate a relay or other low current loads #HS765 ..................... Multi-Hopper Isolator Switch Multi-Hopper Isolator Switch The HS765 Multi-Hopper Switch Isolator allows for the connection of up to four hopper level switches to one location providing a single Normally Closed (N/C) output. The output can be connected to an auger control unit to control the operation of the auger motor. The four hopper level switches are isolated so that electromechanical or two wire proximity switches can be used in any combination. With the HS765, any of the four switches can call for feed causing the auger motor to power on. Relay Output Contact Rating:1-1/2 HP @ 220-240VAC 50/60 Hz. (motor stops) when feed is against the paddle. The single pole, double throw switch is rated at 20 amps or approximately 1 HP. #HS782 .......................Proximity Drop Tube Control Proximity Drop Tube Control An updated drop tube control featuring a proximity for increased reliability. Assembly includes a 16” long molded plastic housing with non-adjustable proxy switch. Complete • 20-250 VAC/ DC • No time delay • Switchable between Normally Open (NO) to Normally Closed (NC) • 6’ cord with watertight control box and 36” pigtail cord. 110/220 volt, 20 amp, rated for 1-1/2 motor. #EL1230 .....................................................Flat Proxy Flat Proxy Replacement sensor for G-Logic Control Pan. • 20-240V • Normally Closed • 30-sec delay • Fixed sensitivity