2020 Hog Slat/Georgia Poultry Retail Product Catalog

98 WWW.HOGSLAT.COM 2” 2” 2” 3-1/2” 3-1/2” 2” 1-7/16” 1” #5301140000 ........................................Double Hole Double Hole Aisle Clip #2011000000 ......................................... Single Hole Single Hole Aisle Clip #8954300000 ........................... Angle Divider clips Angle Divider Clips #1274060000 ........................................Flat Bar Clip Flat Bar Clip #2050980200 ... Flipper Latch, Heavy Duty 3-3/8” Galv #8951860101 ....................................... Flipper Latch #60682 ................................................. 3/8” lock nut #60515 ................................................. 3/8” x 1” bolt Flipper Latch #2011060000 .................................3” Top latch clip #2011070000 .................... 3-1/2” Bottom latch clip Latch Clips #59722 ................................... New Blue spray paint Hog Slat Blue Spray Paint (New Blue) #9970000006 .................................................. 20 oz Galva Zinc Spray-On Galvanizing A) #9101000511 ........1” x 3” Pipe (below divide clip) B) #9101000502 ...........................1” x 19-1/2” Pipe C) #2030630000 ....Gate Clip w/ Pipe Between Clips Divider Clip Pipes Galva Zinc is cold galvanizing spray that protects galvanized metal after welding, cutting or drilling. This 90% pure zinc, epoxy-based formula drys to the touch in as little as ten minutes and can be recoated in one hour. #2002010000 .................... 2” x 2” x 30” Post Tube #2002000000 ................... 2” x 2” x 40” Post Tube #2011700000 ......................30” Upright w/ 7 holes #2011610000 ............... 40” Upright w/ extra holes #2031010000 ................... 31.5” Upright w/ 7 holes #4470108160 ..........................................................................................................................Panel: 31-1/2”, 6-9 #4470144160 ........................................................................................................................Panel: 31-1/2”, 9-12 Post Tubing & Panel Uprights #5001800000 ......................................... Post Gusset Post Gusset #8221200000 ..................................Plastic Post Cap Plastic Post Cap DIY Cut & Weld Panels 1. Knock loose tack welded upright and slide along rod to correct length. 2. Cut off excess rod and weld to upright. 3. Attach clips and/or pipe fitting to each end. Spray welds with matching paint to complete the panels. #2001450000 ............................................ 1/4” thick #8961280000 ............................................1/2” thick 8” x 16” Base Plate A & B. DIY Posts See It In Action! YouTube: Cut & Weld Hog Panels C.